No products
Hope PVC original brake hose, for Hope disc brakes. Kevlar reinforced for high strength against scratches and wear.
Replacement Jitsie Race lever pivot and bolt, designed to prevent any backlash between the lever blade and body. This is the original pivot bolt supplied with all standard Jitsie Race brake levers. Consists of a threaded base and a screw, with two bushings that keep the lever blade in place and prevent any backlash.
Replacement push rod adjuster screw for the Jitsie Race rim brake lever and Hope Trial Zone disc brake lever.
Replacement TrialBikes sloping top cap. Made of aluminium, the top cap provides contact area with the top of the stem in order to tighten the preload bolt (not included).
Replacement Crewkerz top cap to fit stems with flat tops. Made of aluminium, the top cap provides contact area with the top of the stem in order to tighten the preload bolt (also included).
Description and materials
✅ Bar ends included, in order to avoid the common cracks on similar grips.
Hemispherical plastic bushings from innovative brand Racing Line.
Replacement set of Clean Press Fit 3P cups and bearings, compatible with frames from Clean, Crewkerz, Rockman Ash Pro and those with same diameter Press Fit bottom brackets.
Available in silver (with 10mm or 15mm hole) and anodized black (12mm hole).
Disc brake adaptor for Post Mount brakes, made by brake specialists Magura. Allows the use of a 20mm larger rotor on any frame & fork with Post Mount disc brake mounts.
Replacement spring for the Trialtech Sport sprung chain tensioner and single sided chain tensioner. Extra strong design keeps chain tension over time.
Descripción y materiales
Pareja de roldanas de recambio Sunrace, para tensores de cadena de doble roldana. Fabricadas en plástico de alta calidad, lo que minimiza la resistencia a la rodadura. Cada roldana incorpora 11 dientes, con múltiples ventanas que eliminan todo el peso innecesario.
Economic freewheel from DNP, manufactured in Taiwan.Four versions available: with 16 teeth (16T), 18 teeth (18T), 20 teeth (20T) and 22 teeth (22T).
Clean outside spacers for standard Clean rear hubs. They are placed between Cleans inner hub spacers and the standard axle inserts to make the hub fit the Clean K1.2 frame.
Replacement Clean T13 v2 lever piston, hydraulic brake levers that require a 13mm diameter piston. This is an exclusive piston made of high quality aluminium, instead of the standard Nylon material used for other brakes’ pistons.
Pastillas Magura negras incluidas en todos los freno HS33 de serie.
Stan titanium Hope hose spare fittings, to connect the hose to the caliper or lever.
Bashplate rubbers for Clean and Rockman mini bashplates. These rubbers help absorb impacts and reduce damage to the bashplate and frame.
High-quality Clean V2 foam grips, specially developed for bike trials using a high-density, resistant, long-lasting foam.
High-quality Comas foam grips, specially developed for bike trials by Comas team riders Sergi Llongueras, Vincent Hermance and Eloi Palau.
